Enameled Nichrome /Constantan /Copper / Lizt / Waea Tae / Hiriwa / Waea Twist
Whakaahuatanga Hua
Ko enei waea whakaahuru kua whakamahia whanui mo nga parenga paerewa, motuka
nga waahanga, nga parenga awhiowhio, me etahi atu ma te whakamahi i te tukatuka whakamaarama e tino pai ana mo enei tono, me te whakamahi i nga ahuatanga motuhake o te paninga tohu.
I tua atu, ka mahia e matou te whakamaarama paninga tohu o te waea whakarewa utu nui penei i te waea hiriwa me te waea konukawata i runga i te ota. Tena koa whakamahia tenei hanga-i runga i te ota.
Momo Waea Nichrome
NiCr80/20,NiCr70/30,NiCr60/15,NiCr90/10,NiCr35/20,NiCr30/20
Momo Waihanga
| Ingoa whaka-a-ira | Taumata NgawhaºC (wa mahi 2000h) | Ingoa Waehere | Waehere GB | ANSI. MOMO |
| Waea whakaingoa polyurethane | 130 | UEW | QA | MW75C |
| Waea whakawhaiaro polyester | 155 | PEW | QZ | MW5C |
| Waea whakawhaiaro polyester-imide | 180 | EIW | QZY | MW30C |
| Ko te polyester-imide me te polyamide-imide kua whakakikoruatiawaea enameled | 200 | EIWH (DFWF) | QZY/XY | MW35C |
| Waea whakaingoa polyamide-imide | 220 | AIW | QXY | MW81C |
Momo Waea Waea Karekau
Ko te koranu ka taea e tatou te mahi tohu ko te Waea konupora-nikeli koranu, Waea Constantan, Waea Manganin. Waea Kama, Waea NiCr Alloy, Waea FeCrAl Alloy aha atu waea koranu
| matua taonga momo | Cuni1 | CuNI2 | CuNI6 | CuNi8 | CuNI10 | CuNi19 | CuNi23 | CuNi30 | CuNi34 | CuNI44 | |
| matua matū titonga | Ni | 1 | 2 | 6 | 8 | 10 | 19 | 23 | 30 | 34 | 44 |
| MN | / | / | / | / | / | 0.5 | 0.5 | 1.0 | 1.0 | 1.0 | |
| CU | okiokinga | okiokinga | okiokinga | okiokinga | okiokinga | okiokinga | okiokinga | okiokinga | okiokinga | okiokinga | |
| mōrahi mahi pāmahana | / | 200 | 220 | 250 | 250 | 300 | 300 | 350 | 350 | 400 | |
| kiato g/cm3 | 8.9 | 8.9 | 8.9 | 8.9 | 8.9 | 8.9 | 8.9 | 8.9 | 8.9 | 8.9 | |
| parenga i te 20 °c | 0.03 ± 10% | 0.05± 10% | 0.10± 10% | 0.12± 10% | 0.15± 10% | 0.25± 5% | 0.30± 5% | 0.35± 5% | 0.40± 5% | 0.49± 5% | |
| pāmahana whakarea o ātete | <100 | <120 | <60 | <57 | <50 | <25 | <16 | <10 | -0 | <-6 | |
| whakakorikori kaha mpa | >210 | >220 | >250 | >270 | >290 | >340 | >350 | >400 | >400 | >420 | |
| whakaroa | >25 | >25 | >25 | >25 | >25 | >25 | >25 | >25 | >25 | >25 | |
| rewa tohu °c | 1085 | 1090 | 1095 | 1097 | 1100 | 1135 | 1150 | 1170 | 1180 | 1280 | |
| whakarea o te kawe | 145 | 130 | 92 | 75 | 59 | 38 | 33 | 27 | 25 | 23 |
nicr8020 koranu waea whakawera
1. Mo te waea Nichrome
Ko te koranu Nichrome kei roto ko te nickel parakore, ko te koranu NiCr, ko te koranu Fe-Cr-Al me te koranu nickel parahi.
Nikara chrome alloys: Ni80Cr20, Ni70Cr30, Ni60Cr15, Ni35Cr20, Ni30Cr20, Cr25Ni20, nickel parakore Ni200 me Ni201
2.Main Painga me te Tono
1. Nickel-chromium, nickel-chromium koranu me te teitei me te pumau, te aukati i te waikura, te pai o te waikura o te mata, he pai ake i raro i te teitei o te wera me te kaha o te rui, te pai o te ngawari, te pai o te mahi me te weldability.
2.Our Products whānui e pā ana ki te ahumahi matū, tikanga whakarewa, ahumahi karaihe, ahumahi uku, rohe taputapu kāinga me te pera i runga i.
1) Te hanganga matū:
| Waitohu | Te hanganga matū | Si | Cr | Ni | Al | Fe | |||
| C | P | S | Mn | ||||||
| Kaua e nui ake | |||||||||
| Cr20Ni80 | 0.08 | 0.020 | 0.015 | 0.60 | 0.75-1.60 | 20.0-23.0 | noho | ≤0.50 | ≤1.0 |
| Cr15Ni60 | 0.08 | 0.020 | 0.015 | 0.60 | 0.75-1.60 | 15.0-18.0 | 55.0-61.0 | ≤0.50 | noho |
| Cr20Ni35 | 0.08 | 0.020 | 0.015 | 1.00 | 1.00-3.00 | 18.0-21.0 | 34.0-37.0 | - | noho |
| Cr20Ni30 | 0.08 | 0.020 | 0.015 | 1.00 | 1.00-2.00 | 18.0-21.0 | 30.0-34.0 | - | noho |
2) Rahi me nga Whakaaetanga
A, no te ko te hua i "M" mana, kia whai i te paerewa GB / T1234-1995
1) Ātete:
| Waitohu | Cr20Ni80 | Cr20Ni60 | Cr20Ni35 | Cr20Ni30 | ||
| Diamita mm | <0.50 | 0.50-3.0 | <0.50 | ≥0.50 | <0.50 | ≥0.50 |
| parenga (20°C)uΩ·m | 1.09±0.05 | 1.13±0.05 | 1.12±0.05 | 1.15±0.05 | 1.04±0.05 | 1.06±0.05 |
